Forwarded from Tasker | TPC (channel)
#project #BatteryMonitor
DESCRIPTION
Here you have a small project to be aware of the state of our battery at the time of charging, as well as using it (not charging). And it works without root, since it doesn't need to read raw values directly from the files located in' /sys/class/power_supply'.
There are two modes in which it can work: automatic, activating when detecting charging; and manual, if we want to know a measurement in a timely manner, making use of a "Quick Settings Tile" (AutoNotification required) in Android Nougat.
And these are the data it will provide us through a permanent notification in the status bar:
· Battery percentage (%)
· Current temperature (ºC)
· Voltage (V)· Load/Supply in milliamp hours (mAh)
· Connection type, if it exists (AC, USB, Wireless)
· Estimated total charging/discharging time (TESTING)
Notes:
- There's another very similar version of the project from our well known buddy (@MeloProfessional) that you can check on his TSB channel: Go!
- In the actions referred to the control of the project using the 'Quick Tile', all refers to '4', both in variables, as in tile number, because I have others set too.
- At the time of connection, or manual activation is normal that some of the updated values, or established during the first seconds, or perhaps minutes may not appear. That's because Tasker must wait for the intent to collect all the corresponding data. (for that reason I have modified the tasks so that those values without any value, will appear as '- - x')
- In 'X - Battery Monitor' and 'X - Battery Monitor (on)' tasks, it will be necessary to adjust the value '2300' by the amount of mAh that our battery has.
AUTHOR
@SmartPhoneLover
VERSION
1.0
DESCRIPTION
Here you have a small project to be aware of the state of our battery at the time of charging, as well as using it (not charging). And it works without root, since it doesn't need to read raw values directly from the files located in' /sys/class/power_supply'.
There are two modes in which it can work: automatic, activating when detecting charging; and manual, if we want to know a measurement in a timely manner, making use of a "Quick Settings Tile" (AutoNotification required) in Android Nougat.
And these are the data it will provide us through a permanent notification in the status bar:
· Battery percentage (%)
· Current temperature (ºC)
· Voltage (V)· Load/Supply in milliamp hours (mAh)
· Connection type, if it exists (AC, USB, Wireless)
· Estimated total charging/discharging time (TESTING)
Notes:
- There's another very similar version of the project from our well known buddy (@MeloProfessional) that you can check on his TSB channel: Go!
- In the actions referred to the control of the project using the 'Quick Tile', all refers to '4', both in variables, as in tile number, because I have others set too.
- At the time of connection, or manual activation is normal that some of the updated values, or established during the first seconds, or perhaps minutes may not appear. That's because Tasker must wait for the intent to collect all the corresponding data. (for that reason I have modified the tasks so that those values without any value, will appear as '- - x')
- In 'X - Battery Monitor' and 'X - Battery Monitor (on)' tasks, it will be necessary to adjust the value '2300' by the amount of mAh that our battery has.
AUTHOR
@SmartPhoneLover
VERSION
1.0
Tasker | ADVANCED (channel)
https://taskerprofilecenter.blogspot.com/2019/12/project-battery-monitor-v11.html
#project #BatteryMonitor
DESCRIPTION
Here you have a small project to be aware of the status of your battery at the time of charging. And it works without root, since it doesn't need to read raw values directly from the files located in' /sys/class/power_supply'.
This is the info you will know in real time:
• Temperature (ºC)
• Watts (W) (*)
• Voltage (V)
• Charge current (mA)
• Accumulated capacity (mAh)
• Connection type (AC, USB, Wireless)
• Estimated total charging time
Notes:
- Thanks to @Valdorg for helping on building the project, and @cruzer_blaze2, @MeloProfessional for helping on testing/debugging.
- There's another very similar version of the project from our well known buddy (@MeloProfessional) that you can check on his TSB channel: Go!
- At the time of connection, will be normal that some of the values, during the first seconds or perhaps minutes, may not appear. That's because Tasker must wait for the intent to collect all the corresponding data.
- If you don't know the battery design capacity of your device you can get it using this profile.
- (*) To get that info, the device has to be rooted.
CREDITS
@SmartPhoneLover
@Valdorg
@cruzer_blaze2
@MeloProfessional
CHANGELOG
- New: Full battery statistics for desktop view (notification with basic info will continue to be visible). (tap notification)
- New: Show how much battery has been charged in mAh during the current session.
- New: Watts measure. (root needed)
- Fix: Missing notification category for Android 8.0+.
- Other: Removed percentage (%) count value. (only for notification)
- Other: Removed all related to statusbar tile. So, no more manual check for battery statistics. Sorry.
- Other: Changed the name of all variables to more descriptive ones.
- Other: Deleted Spanish version.
- Other: Added 'Setup' tasks.
- Other: Minor changes.
VERSION
v1.1
DESCRIPTION
Here you have a small project to be aware of the status of your battery at the time of charging. And it works without root, since it doesn't need to read raw values directly from the files located in' /sys/class/power_supply'.
This is the info you will know in real time:
• Temperature (ºC)
• Watts (W) (*)
• Voltage (V)
• Charge current (mA)
• Accumulated capacity (mAh)
• Connection type (AC, USB, Wireless)
• Estimated total charging time
Notes:
- Thanks to @Valdorg for helping on building the project, and @cruzer_blaze2, @MeloProfessional for helping on testing/debugging.
- There's another very similar version of the project from our well known buddy (@MeloProfessional) that you can check on his TSB channel: Go!
- At the time of connection, will be normal that some of the values, during the first seconds or perhaps minutes, may not appear. That's because Tasker must wait for the intent to collect all the corresponding data.
- If you don't know the battery design capacity of your device you can get it using this profile.
- (*) To get that info, the device has to be rooted.
CREDITS
@SmartPhoneLover
@Valdorg
@cruzer_blaze2
@MeloProfessional
CHANGELOG
- New: Full battery statistics for desktop view (notification with basic info will continue to be visible). (tap notification)
- New: Show how much battery has been charged in mAh during the current session.
- New: Watts measure. (root needed)
- Fix: Missing notification category for Android 8.0+.
- Other: Removed percentage (%) count value. (only for notification)
- Other: Removed all related to statusbar tile. So, no more manual check for battery statistics. Sorry.
- Other: Changed the name of all variables to more descriptive ones.
- Other: Deleted Spanish version.
- Other: Added 'Setup' tasks.
- Other: Minor changes.
VERSION
v1.1
Tasker | ADVANCED (channel)
https://taskerprofilecenter.blogspot.com/2019/12/project-battery-monitor-v12.html
#project #BatteryMonitor
DESCRIPTION
Here you have a small project to be aware of the status of your battery at the time of charging.
This is the info you will know in real time:
• Temperature (ºC)
• Watts (W)
• Voltage (V)
• Charge current (mA)
• Accumulated capacity (mAh)
• Connection type (AC, USB, Wireless)
• Estimated total charging time
Notes:
- Thanks to @Valdorg for helping on building the project, and @cruzer_blaze2, @MeloProfessional for helping on testing/debugging.
- There's another very similar version of the project from our well known buddy (@MeloProfessional) that you can check on his TSB channel: Go!
- At the time of connection, will be normal that some of the values, during the first seconds or perhaps minutes, may not appear. That's because Tasker must wait for the intent to collect all the corresponding data.
- If you don't know the battery design capacity of your device you can get it using this profile.
- Except for 'Watts (W)', the rest of the values will be gotten without root. But, if non-root fails for whatever reason, root will be used instead.
- A debug task (Debug Task) is included in case the user has problems with erroneous values or not shown. Follow the instructions inside it to know how to use it.
CREDITS
@SmartPhoneLover
@Valdorg
@cruzer_blaze2
@MeloProfessional
CHANGELOG
- New: Temperature mode selection (°C/°F). (configure it from 'Setup' task)
- New: Debug task (separated from the project) to send logs to me (dev of the project), if it fails reading some of the values. (read notes about it)
- Fix: Unset values due to non-existent files/sources now won't prevent the rest of values not to be updated.
VERSION
v1.2
DESCRIPTION
Here you have a small project to be aware of the status of your battery at the time of charging.
This is the info you will know in real time:
• Temperature (ºC)
• Watts (W)
• Voltage (V)
• Charge current (mA)
• Accumulated capacity (mAh)
• Connection type (AC, USB, Wireless)
• Estimated total charging time
Notes:
- Thanks to @Valdorg for helping on building the project, and @cruzer_blaze2, @MeloProfessional for helping on testing/debugging.
- There's another very similar version of the project from our well known buddy (@MeloProfessional) that you can check on his TSB channel: Go!
- At the time of connection, will be normal that some of the values, during the first seconds or perhaps minutes, may not appear. That's because Tasker must wait for the intent to collect all the corresponding data.
- If you don't know the battery design capacity of your device you can get it using this profile.
- Except for 'Watts (W)', the rest of the values will be gotten without root. But, if non-root fails for whatever reason, root will be used instead.
- A debug task (Debug Task) is included in case the user has problems with erroneous values or not shown. Follow the instructions inside it to know how to use it.
CREDITS
@SmartPhoneLover
@Valdorg
@cruzer_blaze2
@MeloProfessional
CHANGELOG
- New: Temperature mode selection (°C/°F). (configure it from 'Setup' task)
- New: Debug task (separated from the project) to send logs to me (dev of the project), if it fails reading some of the values. (read notes about it)
- Fix: Unset values due to non-existent files/sources now won't prevent the rest of values not to be updated.
VERSION
v1.2
Tasker | ADVANCED (channel)
https://taskerprofilecenter.blogspot.com/2020/09/project-battery-monitor-v13.html
#project #BatteryMonitor
DESCRIPTION
Here you have a project to be aware of the status of the battery while charging, providing useful information in real-time and helping to protect the battery and the device itself against critical temperatures and warning you when charged at a specific level.
These are the main features:
• Real time information (notification and floating scene)
• Battery level and temperature protection (charging limits).
• Enable/disable charging in the background (charging limits). (root only)
• Solid and colored battery icon, according to the current level (%).
This is the info you will know in real time:
• Connection type (AC, USB, Wireless)
• Estimated total charging time
• Input current (mA)
• Max input from charger (mA, V, W)
• Temperature (ºC/°F)
• Voltage (V)
• Watts (W)
An 'Initial Setup' task is included, which needs to be executed on first import, regardless of whether it is imported from TaskerNet or XML.
Although the project obtains the values from the system itself, these will never reflect the accuracy of those returned by specific power meters.
Notes:
- Thanks to @AndersonMarcio, @cruzer_blaze2, @GeovanDamascenofor, @gerardo246, @MeloProfessional and @Valdorg for helping on building and testing/debugging the project.
- Here you will find the task from which the color animation feature was based on. (Credits: @MeloProfessional)
- Single click the notification to show 'Desktop View' mode.
- During the first seconds or perhaps minutes, some of the values may not appear. That's because Tasker must wait for the intent to collect all the corresponding data. If some of them remain unset for a long time, that means that your device doesn't support retrieving such information, or the project is not yet adapted for your device.
- The capacity (%) and temperature (ºC/ºF) can be used as charging limiters to protect the battery and the device itself. When a certain value (configured from 'Setup' task) is detected during charging, the device will automatically cut off the power even if the charger remains plugged in, if rooted; and, a notification (voice) will begin to warn of this situation, if not rooted.
- By default, the 'BM - Timer' profile (trigger: temperature) will check every 10 min if charging can be resumed without user interaction. Configure it according to your needs.
- The file(s) that allows cutting off the power and resuming charging in the background, if supported, must be configured for your device. Look for the actions labeled as yellow (Enable/Disable Charging) on 'BM - Collect Battery Data' task and the task linked to the 'BM - Timer' profile.
- If Tasker fails to write to the 'Enable/Disable Charging' file, try using 'chmod +rw' or a permission that works for you.
- To find the right file(s) for toggling charging in the background, if available for your device, you can try 'ACCA' app, or 'Tasker Charging Switch' project (Credits: @MeloProfessional).
- If you don't know the battery design capacity of your device you can get it using this profile.
- If you see the 'time_error' message for charging time, that means that your SDK is not the minimum required and there was an error getting mAh of your battery. So, you will need to configure the capacity from 'Setup' task, manually.
- A debug task (Debug Task) is included in case the user has problems with erroneous values or not shown. Follow the instructions inside it to know how to use it.
CREDITS
@SmartPhoneLover
@AndersonMarcio
@cruzer_blaze2
@GeovanDamascenofor
@gerardo246
@MeloProfessional
@Valdorg
DESCRIPTION
Here you have a project to be aware of the status of the battery while charging, providing useful information in real-time and helping to protect the battery and the device itself against critical temperatures and warning you when charged at a specific level.
These are the main features:
• Real time information (notification and floating scene)
• Battery level and temperature protection (charging limits).
• Enable/disable charging in the background (charging limits). (root only)
• Solid and colored battery icon, according to the current level (%).
This is the info you will know in real time:
• Connection type (AC, USB, Wireless)
• Estimated total charging time
• Input current (mA)
• Max input from charger (mA, V, W)
• Temperature (ºC/°F)
• Voltage (V)
• Watts (W)
An 'Initial Setup' task is included, which needs to be executed on first import, regardless of whether it is imported from TaskerNet or XML.
Although the project obtains the values from the system itself, these will never reflect the accuracy of those returned by specific power meters.
Notes:
- Thanks to @AndersonMarcio, @cruzer_blaze2, @GeovanDamascenofor, @gerardo246, @MeloProfessional and @Valdorg for helping on building and testing/debugging the project.
- Here you will find the task from which the color animation feature was based on. (Credits: @MeloProfessional)
- Single click the notification to show 'Desktop View' mode.
- During the first seconds or perhaps minutes, some of the values may not appear. That's because Tasker must wait for the intent to collect all the corresponding data. If some of them remain unset for a long time, that means that your device doesn't support retrieving such information, or the project is not yet adapted for your device.
- The capacity (%) and temperature (ºC/ºF) can be used as charging limiters to protect the battery and the device itself. When a certain value (configured from 'Setup' task) is detected during charging, the device will automatically cut off the power even if the charger remains plugged in, if rooted; and, a notification (voice) will begin to warn of this situation, if not rooted.
- By default, the 'BM - Timer' profile (trigger: temperature) will check every 10 min if charging can be resumed without user interaction. Configure it according to your needs.
- The file(s) that allows cutting off the power and resuming charging in the background, if supported, must be configured for your device. Look for the actions labeled as yellow (Enable/Disable Charging) on 'BM - Collect Battery Data' task and the task linked to the 'BM - Timer' profile.
- If Tasker fails to write to the 'Enable/Disable Charging' file, try using 'chmod +rw' or a permission that works for you.
- To find the right file(s) for toggling charging in the background, if available for your device, you can try 'ACCA' app, or 'Tasker Charging Switch' project (Credits: @MeloProfessional).
- If you don't know the battery design capacity of your device you can get it using this profile.
- If you see the 'time_error' message for charging time, that means that your SDK is not the minimum required and there was an error getting mAh of your battery. So, you will need to configure the capacity from 'Setup' task, manually.
- A debug task (Debug Task) is included in case the user has problems with erroneous values or not shown. Follow the instructions inside it to know how to use it.
CREDITS
@SmartPhoneLover
@AndersonMarcio
@cruzer_blaze2
@GeovanDamascenofor
@gerardo246
@MeloProfessional
@Valdorg
HASHTAGS LIST OF TASKER PROFILE CENTER CHANNEL
https://t.me/tasker_tpc_channel
Click a hashtag to navigate content...
- SHARES -
#AdGuardToggler #AdvancedPowerMenu #AlwaysOnDisplayToggle #AndroidPieScreenBrightnessWorkaround #AppsCacheCleaner #AppsKeepScreenOn #AutoSwitchKeyboard #BackgroundMusicPlaybackResumeforTwitter #BatteryDesignCapacityChecker #BatteryLevel10 #BatteryMonitor #BitcoinMiningProfitabilityCalculator #BluetoothOn #BTChargerLogReport #BuildpropEditor #CaffeineQSTile #CalendarExpress #CallANumber #CallRecorder #CameraTimestamp #CamScannerAuto #ChangeScreenResolution #CheckAdaptativeBrightness #CheckDeviceOrientation #CheckDeviceOrientationXYZ #CheckInternetAvailability #CheckInternetConnectionType #CheckKeyguardStatus #CheckMobileDataStatus #CheckRadiosSignalStrength #ChessClock #CollectScreenElements #CollectScreenElementsAutoInputUIQuery #ColoredNotes #ColorPickerARGB #ConvertDateTimeFormatIntoEpoch #ConvertFilesToBase64 #CPUStats #CurrentAppActivity #CustomStockNavbar #DeadPixelAnalyzer #DesktopShortcuts #DetectWhenTaskerOpens #DeviceBackupToNAS #DeviceFloatingVolume #DeviceNotchControl #DeviceViewer #DoNotDisturbCallException #EdgeMusicPlayer #EnableSystemScreensaver #EncriptDecryptStringsCipher #Energy3DOverlay #EnergyBar #EvernoteIntents #FilenameChooserforEasyVoiceRecorder #FindMatchingPatternBetweenTwoArrays #FingerprintDemoActions #GetAllAppsInstalledTime #GetAvailableCPUCores #GetLockscreenStatus #GetMinMaxBrightnessLevels #GetMinMaxVolumeSteps #GetMultimediaMetadata #GetPowerampPlaylistDataDB #GrantAccessibilityService #HeadsetButtonHelper #HeartRateCalculator #HeartRateMeter #HexClock #HighTemperatureWarningDevice #HiQMP3RecorderIntents #InformationPresetScreen #IntentsBroadcastMonitor #IntentsCollection #KillBackgroundProcesses #LaunchAppOnGooglePlayStore #LeftRightSpeakerTest #ListenForVolumeChangesDynamically #LockscreenStatusbarLocker #MaterialColorPalette #MaterialDesignRadioButton #MIUIMusicPlayerIntents #MIUIScreenRecorderIntents #MorseCodeTranslator #MusicControl #NavigationButtonsActions #NightClock #OmniaMusicPlayerIntents #OpenAppPermissionsPageInBackground #OpenFileTypesUsingIntents #OpenMultipleWebsitesInDifferentTabs #PerAppDPIChanger #PerAppResolutionChanger #PlaySoundRawExternalOnline #PodcastAddictIntents #PowerampIntents #ProximitySensorWorkaroundRedmiNote7 #QRWiFiConnect #QuickTranslator #RandomDice #RemoveRepeatedElementsFromArray #RerouteAudio #RootChecker #RoundedCorners #SayCurrentOpenedApp #SayWhoIsCallingYou #ScreenAlwaysOnWhenTaskerCoding #ScreenCapture #ScreenRecorder #ScreenshotPlus #SetRandomWallpaperEveryDay #ShellCollection #ShowAppSettings #SideAppsDrawer #SilentVibrateMode #SleepAsAndroidIntents #SleepTracker #SMSParser #SoundMeterRecorder #SpellingCurrentTime #StartPlayingMusicOnBTConnected #StorePicturesIntoDB #StudentClassRecorder #SwitchControl #SwitchDataBTGPSAutomaticallyWhenCharging #SystemLocaleQSTile #TalkingClock #TaskerAppLocker #TaskerBackupsEncryption #TaskerClockScreensaver #TaskerContentViewer #TaskerFingerprintProtection #TaskerKeyboardIssueWorkaround #TaskerProjectsTracker #TaskerScenePositionHelper #TaskerSwitcher #TelegramCleaner #TerminalLog #ToggleAndroidBackgroundProcessLimit #ToggleDNDDuringCall #ToggleDoubleTapToWake #ToggleFlashlight #ToggleImmersiveMode #ToggleLockscreen #TogglePixelStyle #TracksRandomize #TurnOnOffScreenProximitySensor #Vers #VibratorIntensityChanger #WakeOnLANManager #WhatsAppCleaner #WiFiModuleCapabilities #YouTubeSaver
Last Added/Updated (2020-09-06)
#BatteryMonitor
#BitcoinMiningProfitabilityCalculator
#CheckKeyguardStatus
#CPUStats
#DeviceFloatingVolume
#Energy3DOverlay
#GetAllAppsInstalledTime
#GetAvailableCPUCores
#HeadsetButtonHelper
#ListenForVolumeChangesDynamically
#PerAppDPIChanger
#PerAppResolutionChanger
#RerouteAudio
#TaskerClockScreensaver
#TerminalLog
#TogglePixelStyle
- TUTORIALS -
#CustomGrid #HideVoiceDialogAndLongPressedMenuAutoVoice #ImportingXMLTasker #TaskerDualInstanceVMOS
- TASKER DEV ANN -
#JoinAppDev #TaskerDev
https://t.me/tasker_tpc_channel
Click a hashtag to navigate content...
- SHARES -
#AdGuardToggler #AdvancedPowerMenu #AlwaysOnDisplayToggle #AndroidPieScreenBrightnessWorkaround #AppsCacheCleaner #AppsKeepScreenOn #AutoSwitchKeyboard #BackgroundMusicPlaybackResumeforTwitter #BatteryDesignCapacityChecker #BatteryLevel10 #BatteryMonitor #BitcoinMiningProfitabilityCalculator #BluetoothOn #BTChargerLogReport #BuildpropEditor #CaffeineQSTile #CalendarExpress #CallANumber #CallRecorder #CameraTimestamp #CamScannerAuto #ChangeScreenResolution #CheckAdaptativeBrightness #CheckDeviceOrientation #CheckDeviceOrientationXYZ #CheckInternetAvailability #CheckInternetConnectionType #CheckKeyguardStatus #CheckMobileDataStatus #CheckRadiosSignalStrength #ChessClock #CollectScreenElements #CollectScreenElementsAutoInputUIQuery #ColoredNotes #ColorPickerARGB #ConvertDateTimeFormatIntoEpoch #ConvertFilesToBase64 #CPUStats #CurrentAppActivity #CustomStockNavbar #DeadPixelAnalyzer #DesktopShortcuts #DetectWhenTaskerOpens #DeviceBackupToNAS #DeviceFloatingVolume #DeviceNotchControl #DeviceViewer #DoNotDisturbCallException #EdgeMusicPlayer #EnableSystemScreensaver #EncriptDecryptStringsCipher #Energy3DOverlay #EnergyBar #EvernoteIntents #FilenameChooserforEasyVoiceRecorder #FindMatchingPatternBetweenTwoArrays #FingerprintDemoActions #GetAllAppsInstalledTime #GetAvailableCPUCores #GetLockscreenStatus #GetMinMaxBrightnessLevels #GetMinMaxVolumeSteps #GetMultimediaMetadata #GetPowerampPlaylistDataDB #GrantAccessibilityService #HeadsetButtonHelper #HeartRateCalculator #HeartRateMeter #HexClock #HighTemperatureWarningDevice #HiQMP3RecorderIntents #InformationPresetScreen #IntentsBroadcastMonitor #IntentsCollection #KillBackgroundProcesses #LaunchAppOnGooglePlayStore #LeftRightSpeakerTest #ListenForVolumeChangesDynamically #LockscreenStatusbarLocker #MaterialColorPalette #MaterialDesignRadioButton #MIUIMusicPlayerIntents #MIUIScreenRecorderIntents #MorseCodeTranslator #MusicControl #NavigationButtonsActions #NightClock #OmniaMusicPlayerIntents #OpenAppPermissionsPageInBackground #OpenFileTypesUsingIntents #OpenMultipleWebsitesInDifferentTabs #PerAppDPIChanger #PerAppResolutionChanger #PlaySoundRawExternalOnline #PodcastAddictIntents #PowerampIntents #ProximitySensorWorkaroundRedmiNote7 #QRWiFiConnect #QuickTranslator #RandomDice #RemoveRepeatedElementsFromArray #RerouteAudio #RootChecker #RoundedCorners #SayCurrentOpenedApp #SayWhoIsCallingYou #ScreenAlwaysOnWhenTaskerCoding #ScreenCapture #ScreenRecorder #ScreenshotPlus #SetRandomWallpaperEveryDay #ShellCollection #ShowAppSettings #SideAppsDrawer #SilentVibrateMode #SleepAsAndroidIntents #SleepTracker #SMSParser #SoundMeterRecorder #SpellingCurrentTime #StartPlayingMusicOnBTConnected #StorePicturesIntoDB #StudentClassRecorder #SwitchControl #SwitchDataBTGPSAutomaticallyWhenCharging #SystemLocaleQSTile #TalkingClock #TaskerAppLocker #TaskerBackupsEncryption #TaskerClockScreensaver #TaskerContentViewer #TaskerFingerprintProtection #TaskerKeyboardIssueWorkaround #TaskerProjectsTracker #TaskerScenePositionHelper #TaskerSwitcher #TelegramCleaner #TerminalLog #ToggleAndroidBackgroundProcessLimit #ToggleDNDDuringCall #ToggleDoubleTapToWake #ToggleFlashlight #ToggleImmersiveMode #ToggleLockscreen #TogglePixelStyle #TracksRandomize #TurnOnOffScreenProximitySensor #Vers #VibratorIntensityChanger #WakeOnLANManager #WhatsAppCleaner #WiFiModuleCapabilities #YouTubeSaver
Last Added/Updated (2020-09-06)
#BatteryMonitor
#BitcoinMiningProfitabilityCalculator
#CheckKeyguardStatus
#CPUStats
#DeviceFloatingVolume
#Energy3DOverlay
#GetAllAppsInstalledTime
#GetAvailableCPUCores
#HeadsetButtonHelper
#ListenForVolumeChangesDynamically
#PerAppDPIChanger
#PerAppResolutionChanger
#RerouteAudio
#TaskerClockScreensaver
#TerminalLog
#TogglePixelStyle
- TUTORIALS -
#CustomGrid #HideVoiceDialogAndLongPressedMenuAutoVoice #ImportingXMLTasker #TaskerDualInstanceVMOS
- TASKER DEV ANN -
#JoinAppDev #TaskerDev