⛏ msOS
gminer v2.61
⛏ Windows
gminer v2.61
⚙️ msOS
- New commands:
- New feature: Auto-locking your SSH (22) and Shellinabox (4200) if msOS detects that your IP is exposed and therefore protecting you from potential unauthorized access.
- Motd got an update to show a warning if your machine is running on the public IP.
- Support for latest Nvidia 470.57.02 driver. Available within
gminer v2.61
⛏ Windows
gminer v2.61
⚙️ msOS
- New commands:
ssh-lock and ssh-unlock to enable or disable SSH and Shellinabox from outside the network.- New feature: Auto-locking your SSH (22) and Shellinabox (4200) if msOS detects that your IP is exposed and therefore protecting you from potential unauthorized access.
- Motd got an update to show a warning if your machine is running on the public IP.
- Support for latest Nvidia 470.57.02 driver. Available within
nvidia-update tool. Install with nvidia-update --install 470.57.02
- General firewall improvements.🌐 Workers list
- Extended edit button: You can now change worker's type (AMD/Nvidia/ASIC), system (msOS/Windows/Antminer/...), and group(s) directly from the workers' list by clicking on the pencil icon for editing.
- Filter: Your filter settings will now get saved for longer period of time.
🌐 Dashboard (msOS)
- Sped up reaction time on dashboard when rig reboots or shuts down.
- Added new state: Initializing; when mining client actually started and is preparing to start mining.
- Added new state: Booting; on first sync you will now see Booting state instead of Idle.
- Extended edit button: You can now change worker's type (AMD/Nvidia/ASIC), system (msOS/Windows/Antminer/...), and group(s) directly from the workers' list by clicking on the pencil icon for editing.
- Filter: Your filter settings will now get saved for longer period of time.
🌐 Dashboard (msOS)
- Sped up reaction time on dashboard when rig reboots or shuts down.
- Added new state: Initializing; when mining client actually started and is preparing to start mining.
- Added new state: Booting; on first sync you will now see Booting state instead of Idle.
⛏ msOS
teamredminer v0.8.4
⛏ Windows
teamredminer v0.8.4
miniz v1.8y4rc1
TeamRedMiner: Added fix for failure to load GPU kernels on newer drivers: e.g. Big Navi on Adrenalin 21.6.x. Fixed Haven mining generating hardware errors after the recent hard fork.
⚙️ ASIC Hub v2.9.1
- Support for latest Bitmain Antminer firmware. This update brings back compatibility for config editing and enabling support for: bitmain-work-mode, bitmain-freq-level, bitmain-fan-pwm, bitmain-fan-ctrl parameters.
- New function Sleep mode. Change bitmain-work-mode: 0 (Normal mode), 1 (Sleep mode). Compatible with Scheduler.
teamredminer v0.8.4
⛏ Windows
teamredminer v0.8.4
miniz v1.8y4rc1
TeamRedMiner: Added fix for failure to load GPU kernels on newer drivers: e.g. Big Navi on Adrenalin 21.6.x. Fixed Haven mining generating hardware errors after the recent hard fork.
⚙️ ASIC Hub v2.9.1
- Support for latest Bitmain Antminer firmware. This update brings back compatibility for config editing and enabling support for: bitmain-work-mode, bitmain-freq-level, bitmain-fan-pwm, bitmain-fan-ctrl parameters.
- New function Sleep mode. Change bitmain-work-mode: 0 (Normal mode), 1 (Sleep mode). Compatible with Scheduler.
⛏ msOS
srbminer-mutli v0.7.8
⛏ Windows
srbminer-mutli v0.7.8
Added algorithm Circcash for GPU mining, fee 0.85%. Performance increase on Heavyhash algorithm on GPU's (~15-25%). Fixed auto setup on Ethash algorithm for Navi/Navi2 cards that broke in previous version. Removed devfee for RandomWow, bl2bsha3, Eaglesong, K12, Kadena and Minotaur algorithm. Minor bug fixes.
🌐 Billing
You can now monitor your unconfirmed CoinGate orders (for cryptocurrency payments) on the Billing page. Button [Check order status] will lead you to your CoinGate order page where you can monitor status of the order and request refund for expired or underpaid orders.
🌐 Scheduler
You can now select day range and not just the time.
srbminer-mutli v0.7.8
⛏ Windows
srbminer-mutli v0.7.8
Added algorithm Circcash for GPU mining, fee 0.85%. Performance increase on Heavyhash algorithm on GPU's (~15-25%). Fixed auto setup on Ethash algorithm for Navi/Navi2 cards that broke in previous version. Removed devfee for RandomWow, bl2bsha3, Eaglesong, K12, Kadena and Minotaur algorithm. Minor bug fixes.
🌐 Billing
You can now monitor your unconfirmed CoinGate orders (for cryptocurrency payments) on the Billing page. Button [Check order status] will lead you to your CoinGate order page where you can monitor status of the order and request refund for expired or underpaid orders.
🌐 Scheduler
You can now select day range and not just the time.
🌐 Merch
We have added four new designs to our merch shop which are based on two of the most prosperous cards in the Tarot: King and Queen of Coins.
You can find all of the designs here: https://minerstat.com/merch
🌐 Giveaway
Join our Discord and react on #updates channel to enter the giveaway for 100 EUR coupon code that you can later spend in our Redbubble merch shop: https://minerstat.com/discord
We have added four new designs to our merch shop which are based on two of the most prosperous cards in the Tarot: King and Queen of Coins.
You can find all of the designs here: https://minerstat.com/merch
🌐 Giveaway
Join our Discord and react on #updates channel to enter the giveaway for 100 EUR coupon code that you can later spend in our Redbubble merch shop: https://minerstat.com/discord
⛏ msOS
phoenix-eth v5.7b
⛏ Windows
phoenix-eth v5.7b
Fixed an issue causing crashes with some RX6900/6800/6700 cards under Linux. Increased the maximum supported DAG epoch to 600. Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -cclock -50 will set the core voltage to be 50 mV under the default value. Added ROCr kernels for Vega, Radeon VII, and Navi cards. Added support for AMD Windows drivers up to 21.7.2. Note that Radeon VII cards will not work with drivers 21.6.1 or higher. Added support for AMD Linux drivers up to 21.20. Numerous other fixes and small improvements.
⚙️ msOS
If Nvidia drivers returns an error then ClockTune will wait 25 seconds before attempting to reapply. You may see such event reported in activity and 24 hour logs.
phoenix-eth v5.7b
⛏ Windows
phoenix-eth v5.7b
Fixed an issue causing crashes with some RX6900/6800/6700 cards under Linux. Increased the maximum supported DAG epoch to 600. Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -cclock -50 will set the core voltage to be 50 mV under the default value. Added ROCr kernels for Vega, Radeon VII, and Navi cards. Added support for AMD Windows drivers up to 21.7.2. Note that Radeon VII cards will not work with drivers 21.6.1 or higher. Added support for AMD Linux drivers up to 21.20. Numerous other fixes and small improvements.
⚙️ msOS
If Nvidia drivers returns an error then ClockTune will wait 25 seconds before attempting to reapply. You may see such event reported in activity and 24 hour logs.
⚙️ minerstat for Windows (v6.3.4)
Changes since v6.3.3 version:
- Added memory temperature for Nvidia GPUs. Information is most accurate with GDDR6X and HBM2 memory.
Reminder: Since v6.3.0 release it's possible to update minerstat for Windows from Workers list. To manually update run
🌐 Alerts
We are introducing 3 new alerting options:
- Consumption decrease: You can get alerted when power consumption of a worker drops for selected percentage.
- Consumption increase: You can get alerted when power consumption of a worker increases for a selected percentage (only for paying plans).
- Inactive worker: You can get alerted when worker is inactive for selected amount of minutes. Worker is inactive when it's producing 0 hashrate, so that's not idle.
Changes since v6.3.3 version:
- Added memory temperature for Nvidia GPUs. Information is most accurate with GDDR6X and HBM2 memory.
Reminder: Since v6.3.0 release it's possible to update minerstat for Windows from Workers list. To manually update run
C:/minerstat-windows/auto-updater.exe or reinstall.🌐 Alerts
We are introducing 3 new alerting options:
- Consumption decrease: You can get alerted when power consumption of a worker drops for selected percentage.
- Consumption increase: You can get alerted when power consumption of a worker increases for a selected percentage (only for paying plans).
- Inactive worker: You can get alerted when worker is inactive for selected amount of minutes. Worker is inactive when it's producing 0 hashrate, so that's not idle.
🌐 Diagnostic page (Workers tab)
- Two new columns: Stability (based on estimated uptime) and System reboots count (only for msOS).
- Added sorting.
- Added stability and console errors count also for Windows workers.
🌐 Workers list
Added three new filters regarding Stability issues (based on yesterday's data):
- Poor stability rate;
- System reboots;
- Console errors.
- Two new columns: Stability (based on estimated uptime) and System reboots count (only for msOS).
- Added sorting.
- Added stability and console errors count also for Windows workers.
🌐 Workers list
Added three new filters regarding Stability issues (based on yesterday's data):
- Poor stability rate;
- System reboots;
- Console errors.
⚙️ msOS
- Updated PCI ID database.
- Support for 21.30 amdgpu drivers. Available in
- Enforcing SSH locking policy if public IP matches your local IP. You can disable the protection with
Update is automatic so no action is needed from your side.
- Updated PCI ID database.
- Support for 21.30 amdgpu drivers. Available in
amd-update cli tool. If everything is working fine then you don't have to upgrade from 21.10 or 21.20.- Enforcing SSH locking policy if public IP matches your local IP. You can disable the protection with
ssh-unlock command.Update is automatic so no action is needed from your side.
We are glad to announce that minerstat is participating in API3's API3 Alliance - a strategic coalition of 125+ leading API providers that will share data to further fuel the growing Web3 economy!
With the help of API3, minerstat will be able to get integrated with the new dApps and reach a unique decentralized consumer base. Learn more about the Alliance on https://medium.com/api3/the-api3-alliance-125-api-providers-on-web3-via-airnode-37073df9825d
With the help of API3, minerstat will be able to get integrated with the new dApps and reach a unique decentralized consumer base. Learn more about the Alliance on https://medium.com/api3/the-api3-alliance-125-api-providers-on-web3-via-airnode-37073df9825d
⛏ msOS
trex 0.21.6
⛏ Windows
trex 0.21.6
- T-Rex: Improve compatibility with mining pools on Autolykos2 algorithm. Add optional min/max fan speed constraints in auto-fan mode. Resolved issue with --worker parameter when does not take precedence over the one specified in the config file. Cosmetic and other minor bug fixes.
⚙️ minerstat for Windows
Added support for the latest available kawpowminer v1.2.4. 0% Fee RVN miner, CUDA 11, and RTX30 Series support are available too.
trex 0.21.6
⛏ Windows
trex 0.21.6
- T-Rex: Improve compatibility with mining pools on Autolykos2 algorithm. Add optional min/max fan speed constraints in auto-fan mode. Resolved issue with --worker parameter when does not take precedence over the one specified in the config file. Cosmetic and other minor bug fixes.
⚙️ minerstat for Windows
Added support for the latest available kawpowminer v1.2.4. 0% Fee RVN miner, CUDA 11, and RTX30 Series support are available too.
⚙️ msOS
- Removed obsolete code for Vega overclocking. No longer applying modified tables without ClockTune being set. Make sure to set clocks/voltages in ClockTune.
- Support for latest available Nvidia 470.63.01 drivers. To install manually enter:
Showing your stratum IP address on Stratum Profile. Can be useful to adjust Payout settings on the pool side.
- Removed obsolete code for Vega overclocking. No longer applying modified tables without ClockTune being set. Make sure to set clocks/voltages in ClockTune.
- Support for latest available Nvidia 470.63.01 drivers. To install manually enter:
nvidia-update --install 470.63.01
🌐 Stratu.ms Showing your stratum IP address on Stratum Profile. Can be useful to adjust Payout settings on the pool side.