⭕️API PLAN 14⭕️

✔️Description
Product recirculation from pump discharge to seal chamber through a flow control orifice and seal chamber back to suction through another flow control orifice.

✔️Features
1. Ensures product recirculation as well as venting.

2. Reduces seal chamber pressure.

✔️Use
1. Used in vertical pumps.

2. Used in light hydrocarbon services.

✔️Caution
1. Check for pressure margin between discharge to seal chamber pressure and seal chamber to suction pressure.

✨️✨️⬇️🆔️⬇️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#API_PLAN_14

هند پمپ سیار (ريفيل یونیت) براي شارژ روغن و نيتروژن در سيستم هاي حمايتي مكانيكال سيل و يا هر سيستمي كه نياز به شارژ روغن تا رسيدن به فشار دلخواه دارد مورد استفاده مي باشد که به راحتی فشار لازم را در کوتاهترین زمان ایجاد و با فیلترهای استاندارد از نفوذ هرگونه ذرات به درون سیال جلوگیری می‌نماید.

✨️✨️⬇️🆔️⬇️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#Refill_unit

کاور
نمونه_مشتری
مهندسی_معکوس
فرز_سه_محور
مکانیکال_سیل
آرتا_صنعت_آرسن
تولید_ایرانی
نفت_گاز_پالایش_پتروشیمی
#cover
#customer_sample
#mechanical_seal
#arta_sanat_arsen
#oil_gas_refinary_petrochemical

✨️✨️⬇️🆔️⬇️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#Refill_unit

⭕️API PLAN 23⭕️

✔️Description

This plan involves the forced circulation of process fluids from the seal chamber through a seal flush heat exchanger and back to the seal chamber.

✔️Application Notes
Seal has an internal circulating device (pumping ring) that circulates seal chamber fluid through a cooler and back to the seal chamber.
Provides a cool flush to the seal to improve lubricity, reduce coking, and/or avoid fluid flashing to vapor.
Commonly used for hot water services above 180°F [80°C] (e.g. boiler feed water) and hot hydrocarbon services.
Throat bushing is used to isolate product in the seal chamber from product in the pump volute.
More energy efficient than Plan 21 since only the fluid in the seal chamber is run through the cooler.
If the cooler duty is high, fouling and clogging on the water side can occur over time.
Potential for clogging on the process side if the fluid becomes too viscous at reduced temperature.
Best piping practices must be followed to avoid vapor entrapment and stalled flow in the tubing.

✔️Pros:
Improved energy savings compared to Plan 21
Cool flush improves seal lubricity and reduces coking

✔️Cons:
The use of products with a high viscosity can negatively affect fluid circulation
Maintenance of the Seal Cooler although better than Plan 21


✨️✨️⬇️🆔️⬇️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#API_PLAN_14

فیلم ساخت و ارسال پلان ۲۳(heat exchanger)
مشتری ~ پمپ ساز
منطقه ~ تبریز
آرتا صنعت آرسن

🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻
مبدل حرارتی (heat exchanger) دستگاهی است که در انواع و طرح های مختلف تولید شده و حرارت را در اثر اختلاف دمای ایجاد شده بین دو سیال ، از یک سیال (گاز یا مایع) به سیال دیگر منتقل می کند.

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#Plan_23
#Heat_Exchanger
#arta_sanat_arsen
#mechanical_seal

✅️A Cyclone separator
✅️B Contaminated liquid IN
✅️C Clean liquid OUT
✅️D Separated liquid OUT

🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻
✅️لینک کانال👇🏻
✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#Cyclone_separator

⭕️API PLAN 31⭕️

✔️Description

Product recirculation from discharge through a cyclone separator, which directs clean fluid to the seal and solids back to pump suction.

✔️Features

1. Removes entrained solids from the process fluid.

2. Particles from cyclone separator are returned to suction.

✔️Use

1. Used in media with suspended solids.

✔️Caution

1. Pump throat bushing is recommended.

2. Ensure use for services containing solids with specific gravity twice or more than that of process fluid.

3. Efficiency of a cyclone separator is proportional to the diameter. A larger cyclone diameter leads to less efficient separation, a smaller cyclone diameter provides more efficient separation.

🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻
✅️لینک کانال👇🏻
✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#Plan_31
#Cyclone_separator
#arta_sanat_arsen
#mechanical_seal

🟣 ساخت و ارسال پلن ۳۱
🟣 مشتری ⬅️ پمپ ساز

🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻
جداکننده سیکلون وسیله ای مکانیکی است که از نیروی گریز از مرکز برای جداسازی ذرات معلق از جریان سیال استفاده می کند.
جداکننده شامل یک محفظه استوانه ای با ورودی برای سیال آلوده و یک خروجی برای سیال تمیز است.
سیال به صورت مماس وارد سیکلون می شود و یک حرکت گردابی یا سیکلونی ایجاد می کند. با چرخش سیال در داخل محفظه، نیروی گریز از مرکز، ذرات سنگین‌تر را به سمت دیواره بیرونی هل می‌دهد و باعث می‌شود که آنها به سمت پایین حرکت کنند و در نهایت در انتهای جداکننده جمع شوند. مایع تمیز
شده از طریق خروجی مرکزی خارج می شود.
🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻
✅️لینک کانال👇🏻
✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#Cyclone_separator

⭕️dry_running⭕️

The fluid is not received to the seal chamber so it cause dry running.

جهت دیدن فایلهای آموزشی مکانیکال سیل در این کانال عضو شوید 👇🏻👨‍🔧🇮🇷

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#dry_running

⭕️fluid_film⭕️( فیلم سیال)

The correct form of fluid.


عضویت در کانال آرتا صنعت آرسن 👇🏻👨‍🔧🇮🇷

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#fluid_film

⭕️API PLAN 53B⭕️

✔️Description

Plan 53B requires the use of an extraneous barrier fluid system pressurized by a bladder accumulator delivering clean fluid to the seal faces.

✔️Application Notes
Used with Arrangement 3 seals.
For use in applications where direct gas pressurization, such as in Plan 53A, would risk absorption of the gas into the barrier liquid.
Accumulator and barrier liquid are maintained at a pressure greater than the seal chamber pressure. It is recommended that the barrier fluid pressure always exceeds the maximum seal chamber pressure by at least 20 psi [1.4 bar].
Barrier liquid is circulated through the fluid circuit by means of an internal circulating device (pumping ring).
Venting of the system during commissioning to eliminate all gas and air bubbles from the system is crucial to proper operation. Vent should be closed when pressurizing and during normal pump operation.
The use of a bladder accumulator prevents contact between the pressurization gas and the barrier liquid. This prevents gas absorption into the barrier liquid and allows for high-pressure operation.
Process fluid never leaks to the atmosphere unless system pressure is lost.
Seal performance is monitored by pressure level. Changes in pressure indicate potential leaks at either the inboard or outboard seal faces.
Heat is removed using a heat exchanger.
Barrier liquid must be compatible with the process liquid because it will leak into the product.
System is sensitive to environmental heat loads which may cause significant fluctuations of the system pressure.
Best piping practices must be followed to avoid vapor entrapment and stalled flow in the tubing.

✅️Pros:
Bladder accumulator keeps pressurized gas and barrier liquids from meeting each other
No risk of process fluid leakage
Heat exchanger maintains optimal process temperatures

❌️Cons:
Regular maintenance is required
Requires strict adherence to best piping practices
Barrier fluid and process fluids must be compatible due to the possibility of mixing

آموزش مکانیکال سیل در کانال آرسن👇🏻
✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#Plan_53B
#arta_sanat_arsen
#mechanical_seal

⭕️API Plan 53B⭕️
Barrier fluid system pres­sur­ized by a bladder ac­cu­mu­la­tor sup­ply­ing clean liquid for an arrange­ment 3 pres­sur­ized dual seal.

✅️ A  Cooler
✅️ B  Bladder ac­cu­mu­la­tor
✅️ C  Drain
✅️ D  Vent

عضویت در کانال آرسن👇🏻👨‍🔧🇮🇷

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#Plan_53B
#arta_sanat_arsen
#mechanical_seal

ساخت یک قلم از سفارش قطعات مکانیکال سیل

#کاور
#پتروشیمی
#عسلویه

💯فروش پایان راه نیست، آغاز تعهد است💯

عضویت در کانال تلگرام آرسن👇🏻👨‍🔧🇮🇷

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

اینستاگرام آرسن👇🏻👨‍🔧🇮🇷
✨️✨️➡️🆔️⬅️✨️✨️
Arsen.co.ir

🟣🟣🟣🟣🟣🟣🟣
#Spair_parts
#arta_sanat_arsen
#mechanical_seal

contact us:👇🏻

☎️02165611309
📱09120049885 _ 7
📧Info@arsen-co.com

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#component
#cartridge

contact us:👇🏻

☎️021_65611309
📱09120049885_7
📧Info@arsen-co.com

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#component
#cartridge

contact us:👇🏻

☎️ 021_65611309
📱09120049885_7
📧Info@arsen-co.com

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#component
#cartridge

ارسال هند پمپ سیار
با حجم مخزن ۵۰ لیتر و ۲۰ لیتر
به منطقه بندرعباس
با کوتاه ترین زمان تحویل و بهترین کیفیت


عضویت در کانال تلگرام آرسن👇🏻👨‍🔧🇮🇷

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#refill_unit
#API_PLAN_53_53A_53B_53C

⬇️ Refill unit (هند پمپ سیار) ⬇️

Model: SPN2090/M001_D1
Pump pressure Max: 90 bar
Reservoir Capaxity: 20L & 50L
Liquid: Water / oil / alcohol...
Api Plan: 53_53A_53B_53C

عضویت در کانال تلگرام آرسن👇🏻👨‍🔧🇮🇷

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal

contact us:👇🏻
☎️ 021_65611309
📱09120049885_7
📧Info@arsen-co.com

🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#refill_unit
#API_PLAN_53_53A_53B_53C

⬇️ Repair Mechanical Seal ⬇️

● Burgmann
● Type: H_D1/175_E2
  
⭕️ تعمیر و ارسال مکانیکال سیل بورگمن
به شمال کشور


✅️طراحی،تولید و تعمیر انواع مکانیکال سیل✅️

عضویت در کانال تلگرام آرسن👇🏻👨‍🔧🇮🇷

✨️✨️➡️🆔️⬅️✨️✨️
@mechanicalseal


contact us:👇🏻

☎️ 02165611309
📱09120049885_7
📧Info@arsen-co.com


🟣🟣🟣🟣🟣🟣🟣
#arta_sanat_arsen
#mechanical_seal
#Desin
#Repair
#Retrofit
#wood_industry